Troubleshoot CHKDSK Not Starting in Windows

Unraveling the Mystery: CHKDSK’s Reluctance to Launch on Windows

Run chkdsk in Safe Mode: If chkdsk is not starting normally, try running it in Safe Mode. Restart your computer and press the F8 key repeatedly until the Advanced Boot Options menu appears. From there, select Safe Mode and run chkdsk again.

Overview of CHKDSK Not Working

If CHKDSK is not starting in Windows, there are a few solutions you can try. First, try running CHKDSK in Safe Mode by following these steps:
1. Restart your computer and press F8 repeatedly during startup.
2. Select “Safe Mode with Command Prompt.”
3. In the command prompt, type “CHKDSK C:” (replace “C:” with the drive letter you want to check).
4. Press Enter to start the scan.
If CHKDSK is still not working, another solution is to use a third-party software like MiniTool Partition Wizard. This tool can help you check and fix disk errors. Additionally, you can try running CHKDSK using the command form “chkdsk /r” to scan and fix any disk errors.

When chkdsk fails to start, it’s important to address the issue promptly as it can indicate underlying problems with your computer’s hard drive.

Fix CHKDSK not working error with alternative software

If CHKDSK is not starting in Windows and you’re encountering error messages or your system is stuck in the process, there are alternative solutions you can try. One recommended software is MiniTool Partition Wizard, which can effectively scan and fix file system errors, including RAW drives.

To fix the CHKDSK not starting error:

1. Download and install MiniTool Partition Wizard.
2. Launch the software and select the partition or volume you want to check.
3. Right-click and choose “Check File System”.
4. Follow the on-screen instructions to complete the process.

Run System Restore to fix CHKDSK command not working issue

If you’re experiencing issues with the CHKDSK command not working in Windows, one effective solution is to run System Restore. This can help resolve problems such as CHKDSK getting stuck, RAW drives, or error messages during the scanning process. To do this, follow these steps:

1. Press the Windows key and type “System Restore” in the search bar.
2. Select “Create a restore point” from the results.
3. In the System Properties window, click on the “System Restore” button.
4. Choose a restore point from before the CHKDSK command started causing problems.
5. Follow the on-screen instructions to complete the restoration process.

python
"""
This code does not directly interact with the chkdsk tool, but it demonstrates a sample approach to handling a similar scenario.
"""

import subprocess

def check_disk_health():
try:
# Simulating a situation where chkdsk fails to start
raise OSError("chkdsk not starting") # Simulating the failure to start chkdsk

except OSError as e:
print(f"Error: {e}")

# Perform additional operations to handle the situation
subprocess.run(["sfc", "/scannow"]) # Running System File Checker (sfc) as an alternative

# Usage example
check_disk_health()

In this example, we simulate the situation where `chkdsk` fails to start by raising an `OSError` with the message “chkdsk not starting.” The code then catches the error and performs additional operations to handle the situation. As an alternative, it executes the `sfc /scannow` command using `subprocess.run`, which runs the System File Checker (sfc) tool to check and repair system files.

Correct registry data to fix CHKDSK not running error

To fix the CHKDSK not running error, you can correct the registry data. Here’s how:

1. Press the Windows key + R to open the Run dialog box.
2. Type “regedit” and press Enter to open the Registry Editor.
3. In the left pane, navigate to “HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager”.
4. Right-click on the “BootExecute” value in the right pane and select Modify.
5. Remove any entry that contains “autocheck autochk *”.
6. Click OK and close the Registry Editor.
7. Restart your computer.

By correcting the registry data, you can resolve the issue of CHKDSK not starting in Windows.

Disable hybrid boot to fix CHKDSK not working issue

To fix the issue of CHKDSK not working, you can disable hybrid boot on your Windows PC. This can help resolve problems related to CHKDSK not starting properly. Here’s how:

1. Press the Windows key + X and select “Power Options” from the menu.
2. Click on “Choose what the power buttons do” on the left side of the window.
3. Click on “Change settings that are currently unavailable.”
4. Scroll down to “Shutdown settings” and uncheck “Turn on fast startup (recommended).”
5. Click on “Save changes” to apply the settings.

By disabling hybrid boot, you can ensure that CHKDSK runs properly and resolves any file system errors or disk-related issues.

Repair autochk.exe to fix CHKDSK not running issue

Repairing autochk.exe can help fix the issue of CHKDSK not running in Windows. Here’s how to troubleshoot it:

1. Open the command prompt as an administrator.
2. Type “chkntfs /x C:” to disable CHKDSK on the C: drive.
3. Restart your PC.
4. Open the command prompt again and type “chkdsk /f /r C:” to schedule a CHKDSK scan on the C: drive.
5. Restart your PC once more to initiate the scan.
6. CHKDSK should now run successfully on your Windows system.

This method can resolve CHKDSK not starting issues and help fix any potential disk errors.

Format RAW Drive using Diskpart

To troubleshoot CHKDSK not starting in Windows, you can try formatting the RAW drive using Diskpart. Here’s how:

1. Open the Command Prompt as an administrator.
2. Type diskpart and press Enter to open the Diskpart utility.
3. Type list disk and press Enter to see a list of available disks.
4. Identify the RAW drive you want to format and note its disk number.
5. Type select disk X (replace X with the disk number) and press Enter.
6. Type clean and press Enter to remove all partitions from the disk.
7. Type convert MBR and press Enter to convert the disk to MBR format.
8. Type create partition primary and press Enter to create a new primary partition.
9. Type format fs=ntfs quick (or replace ntfs with the desired file system) and press Enter to format the partition.
10. Once the formatting is complete, type exit and press Enter to close Diskpart.

Defragmenting the disk

If CHKDSK is not starting in Windows, there are a few troubleshooting steps you can take to resolve the issue.

First, try running CHKDSK in safe mode by following these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type “msconfig” and press Enter.
3. In the System Configuration window, go to the Boot tab.
4. Check the “Safe boot” option and select “Minimal”.
5. Click OK and restart your computer.
6. Once in safe mode, open the Command Prompt as an administrator.
7. Type “chkdsk /f” and press Enter to start the disk check.

If CHKDSK still won’t start, it could be due to a program or service conflicting with it. To troubleshoot this, you can perform a clean boot:
1. Press the Windows key + R to open the Run dialog box.
2. Type “msconfig” and press Enter.
3. In the System Configuration window, go to the Services tab.
4. Check the “Hide all Microsoft services” box, then click “Disable all”.
5. Go to the Startup tab and click “Open Task Manager”.
6. In Task Manager, disable all startup items.
7. Close Task Manager and click OK in the System Configuration window.
8. Restart your computer and try running CHKDSK again.

If CHKDSK is still not starting, it could indicate a more serious issue with your system. In such cases, it’s recommended to seek professional assistance or contact Microsoft Support for further guidance.

Run SFC and DISM scan properly

To troubleshoot CHKDSK not starting in Windows, you can run the System File Checker (SFC) and DISM scan. These utilities help identify and repair system file corruption that may be causing the issue.

To run SFC, follow these steps:

1. Open Command Prompt as an administrator.
2. Type “sfc /scannow” and press Enter.
3. Wait for the scan to complete, which may take some time.
4. If any issues are found, SFC will attempt to repair them automatically.

If SFC doesn’t resolve the problem, you can try running a DISM scan:

1. Open Command Prompt as an administrator.
2. Type “dism /online /cleanup-image /restorehealth” and press Enter.
3. Allow the scan to finish, which can take several minutes.
4. If any issues are found, DISM will attempt to fix them.

After running these scans, restart your computer and check if CHKDSK starts properly. If you continue experiencing difficulties, it may be necessary to seek further assistance or explore alternative troubleshooting methods.

Was this article helpful?
YesNo