In this article, we will explore six effective methods to resolve the KMODE_EXCEPTION_NOT_HANDLED error on Windows 10.
Understanding KMODE_EXCEPTION_NOT_HANDLED Error
If you are experiencing the KMODE_EXCEPTION_NOT_HANDLED error on your Windows 10 device, there are several ways to fix it.
Firstly, boot your device into Safe Mode and see if the error persists. If not, it may be caused by a third-party driver. Try updating or uninstalling any recently installed drivers.
If the error still occurs, run a system file check to ensure that all system files are intact. You can also try updating your Windows 10 device to the latest version.
In some cases, the error may be caused by a faulty hardware component. Run a hardware diagnostic test to identify any issues. Lastly, you can try disabling any overclocking settings in your BIOS or updating your BIOS to the latest version.
By following these steps, you can resolve the KMODE_EXCEPTION_NOT_HANDLED error and get your device back up and running.
Disabling Fast Startup to Fix KMODE_EXCEPTION_NOT_HANDLED Error
To fix the KMODE_EXCEPTION_NOT_HANDLED error in Windows 10, disabling Fast Startup is a potential solution. Fast Startup is a feature that saves system information to the hard drive when you shut down your computer, allowing for faster start-up times. However, it can cause conflicts with certain drivers and lead to the KMODE_EXCEPTION_NOT_HANDLED error. To disable Fast Startup, follow these steps:
1. Press the Windows key and type “Power Options.”
2. Click on “Power Options” and then “Choose what the power buttons do.”
3. Click on “Change settings that are currently unavailable.”
4. Scroll down to “Shutdown settings” and uncheck “Turn on fast startup (recommended).”
5. Click “Save changes.”
After disabling Fast Startup, restart your computer and check if the KMODE_EXCEPTION_NOT_HANDLED error has been resolved.
Updating Faulty Drivers to Fix KMODE_EXCEPTION_NOT_HANDLED Error
To fix a KMODE_EXCEPTION_NOT_HANDLED error on Windows 10, one of the common causes is faulty drivers. Updating these drivers can solve the issue.
To start, open the Device Manager by right-clicking on the Start menu and selecting it from the options.
Next, look for any devices with a yellow exclamation mark next to them, indicating a driver issue. Right-click on the device and select “Update driver.”
If Windows doesn’t find any updates, you can download the latest driver from the manufacturer’s website. Make sure to select the correct version for your operating system and hardware.
Once the driver is downloaded, install it and then restart your computer. This should resolve the KMODE_EXCEPTION_NOT_HANDLED error caused by faulty drivers.
1. Open PowerShell with administrator privileges.
2. Type the command “sfc /scannow” and hit enter. This will check and repair any corrupted system files that might be causing the error.
3. Restart your computer and check if the error has been resolved.
4. If the error persists, try updating your drivers. You can do this by going to Device Manager and right-clicking on the device that needs an update. Select “Update driver” and follow the on-screen instructions.
5. If none of the above steps work, try running a virus scan using your preferred antivirus software. This will ensure that your system is not infected with any malware that might be causing the error.
6. If the error still persists, you may need to perform a system restore or reinstall Windows 10 to fix the issue.
Note: These steps are only suggestions and may not guarantee a complete resolution of the issue. Always be cautious when making changes to your system and make sure to backup important data before attempting any major fixes.
Uninstalling Faulty Software/Driver to Fix KMODE_EXCEPTION_NOT_HANDLED Error
To fix the KMODE_EXCEPTION_NOT_HANDLED error on Windows 10, one solution is to uninstall any faulty software or drivers. Begin by entering safe mode via the advanced startup options. Then, open the Device Manager and locate the faulty driver. Right-click and select Uninstall. Follow the prompts to completely remove the driver. If the error is caused by software, go to the Control Panel and select Programs and Features. Locate the software causing the issue and select Uninstall. Be sure to restart your device after uninstalling either the driver or software. This should resolve the KMODE_EXCEPTION_NOT_HANDLED error.
Entering Safe Mode and Installing Missing Drivers to Fix KMODE_EXCEPTION_NOT_HANDLED Error
- Restart your computer and press F8 repeatedly until the Advanced Boot Options menu appears.
- If your computer doesn’t respond to the F8 key, try pressing Shift+F8 instead.
- Select Safe Mode with Networking from the list of options using the arrow keys, and press Enter.
- This will start your computer in Safe Mode with network drivers enabled.
- Open Device Manager by pressing Windows Key+X and selecting it from the menu.
- Look for any devices with a yellow exclamation mark beside them.
- These devices indicate missing or outdated drivers.
- Right-click on the device with the exclamation mark and select Update Driver Software.
- Choose Search automatically for updated driver software.
- If Windows finds an updated driver, follow the instructions to install it.
- If Windows doesn’t find an updated driver, go to the manufacturer’s website and download the latest driver for your device.
- Install the driver and restart your computer.
- Exit Safe Mode by restarting your computer and letting it boot normally.
Repairing the Problem Using Windows to Fix KMODE_EXCEPTION_NOT_HANDLED Error
To fix the KMODE_EXCEPTION_NOT_HANDLED error on your Windows 10 device, you can use the built-in Windows tools to troubleshoot and repair the issue.
1. Restart your computer – sometimes a simple restart can fix the problem.
2. Use the Windows Memory Diagnostic tool to check for memory issues. Press the Windows key + R, type mdsched.exe, and hit Enter. Follow the prompts to restart your computer and run the tool.
3. Update your drivers. Press the Windows key + X, select Device Manager, and find the problematic driver. Right-click it and select Update driver.
4. Use System Restore to revert your computer to a previous state. Search for “System Restore” in the Start menu and follow the prompts.
5. Use the Windows Boot Manager to repair your system. Restart your computer and press the F8 key repeatedly to enter the Advanced Boot Options menu. Select “Repair your computer” and follow the prompts.
6. Perform a clean boot to troubleshoot the issue. Press the Windows key + R, type msconfig, and hit Enter. Select the “Selective startup” option and uncheck “Load startup items.” Restart your computer.
By using these Windows tools, you can fix the KMODE_EXCEPTION_NOT_HANDLED error and get your hp laptop, or other Windows 10 device, back up and running without the etd sys blue screen or boot loop caused by this kernel mode error.
Running Windows Memory Diagnostics to Fix KMODE_EXCEPTION_NOT_HANDLED Error
|Click on the Start menu
|Type “Windows Memory Diagnostic” in the search bar
|Click on “Windows Memory Diagnostic” in the search results
|Select “Restart now and check for problems”
|Wait for the scan to complete
|If any errors are found, follow the prompts to troubleshoot and fix the issue
Recovering Unsaved Data When KMODE_EXCEPTION_NOT_HANDLED Error Occurs
When experiencing a KMODE_EXCEPTION_NOT_HANDLED error in Windows 10, you may lose unsaved data. Fortunately, Microsoft provides a solution to recover it. First, restart your computer and enter Safe Mode by pressing F8 or Shift+F8 during boot. Then, open File Explorer and navigate to the following folder: %SystemRoot%\system32\config. Locate the file named RegBack and copy it to another location. Rename the copy as System and save it. Return to the config folder and rename the System file to System.old. Finally, copy the saved System file to the config folder and restart your computer. This should recover your unsaved data.
Bottom Line: Dealing with KMODE_EXCEPTION_NOT_HANDLED Error on Windows 10
Here are 6 ways to fix the KMODE_EXCEPTION_NOT_HANDLED error on Windows 10:
1. Update Drivers – Ensure that all your drivers are up to date, especially those related to your hp laptop. To do this, go to Device Manager and right-click on the device. Select Update Driver.
2. Check for System File Corruption – Run the System File Checker by typing sfc /scannow in the Command Prompt.
3. Disable Fast Startup – This can be done by going to Power Options and clicking on Choose what the power buttons do. Then, click on Change settings that are currently unavailable, and uncheck the box next to Turn on fast startup.
4. Check for Memory Problems – Run a memory diagnostic test by typing mdsched.exe in the search bar.
5. Remove Recently Installed Programs – If the error started after installing a program, try removing it by going to Control Panel and clicking on Programs and Features.
6. Clean Install Windows – If all else fails, consider doing a clean install of Windows to fix the kmode error windows.
By following these steps, you can fix the KMODE_EXCEPTION_NOT_HANDLED error and get rid of the bsod error or screen kmode handled error.
Tips and Tricks to Prevent KMODE_EXCEPTION_NOT_HANDLED Error on Windows 10
- Update Your Drivers: Make sure all of your drivers are up to date, especially those related to your hardware components such as your graphics card and network adapter.
- Run a System File Checker (SFC) Scan: This tool scans your system files for corruption and repairs them if needed. Open Command Prompt as an administrator and type “sfc /scannow” and hit Enter.
- Check for Windows Updates: Ensure that your Windows 10 is up to date with the latest updates and patches.
- Disable Overclocking: If you have overclocked your CPU, try disabling it and see if the error persists.
- Run a Memory Diagnostic Tool: Use Windows Memory Diagnostic Tool to check your RAM for any issues.
- Uninstall Problematic Programs: If you recently installed a new program, try uninstalling it and see if the error disappears.