Fixing NET Framework 3.5 Error 0x800F081F on Windows 10

Encountering the NET Framework 3.5 Error 0x800F081F on Windows 10 can be frustrating.

Check Your Internet Connection

To fix the NET Framework 3.5 Error 0x800F081F on Windows 10, it is crucial to first check your internet connection. A stable and reliable internet connection is necessary to download and install the required files for fixing the error.

Here’s how you can check your internet connection:

1. Ensure that you are connected to a network: Make sure your computer is connected to a stable network, either through Wi-Fi or Ethernet.

2. Test your internet speed: Use an online speed test tool to check the speed of your internet connection. This will help you determine if the connection is fast enough to download the necessary files.

3. Disable any firewalls or antivirus software temporarily: Sometimes, firewalls or antivirus software can block certain internet connections. Temporarily disabling them can help determine if they are causing any issues.

4. Try accessing a website or downloading a file: Open a web browser and try accessing a website or downloading a small file. If you encounter any issues, it indicates a problem with your internet connection.

5. Restart your modem or router: Sometimes, a simple restart of your modem or router can resolve internet connectivity issues. Unplug the power source, wait for a few seconds, and then plug it back in.

Configure the Group Policy Setting

Group Policy settings interface

1. Press the Windows key + R to open the Run dialog box.
2. Type “gpedit.msc” and press Enter to open the Local Group Policy Editor.
3. In the left-hand pane, navigate to “Computer Configuration” > “Administrative Templates” > “System”.
4. Scroll down and double-click on “Specify settings for optional component installation and component repair”.
5. Select the “Enabled” option.
6. Check the box next to “Contact Windows Update directly to download repair content instead of Windows Server Update Services (WSUS)”.
7. Click on the “OK” button to save the changes.

By configuring this Group Policy Setting, you are allowing Windows 10 to download the necessary repair content directly from Windows Update instead of relying on WSUS. This can help resolve the NET Framework 3.5 Error 0x800F081F.

Remember to restart your computer after making these changes for the new settings to take effect.

If you encounter any issues during this process, feel free to seek assistance from a system administrator or refer to Microsoft’s official support documentation.

Use Windows Installation Media

To fix the NET Framework 3.5 Error 0x800F081F on Windows 10, you can use the Windows Installation Media. Follow these steps:

1. Insert the Windows Installation Media (DVD or USB) into your computer.

2. Open a Command Prompt with administrative privileges. You can do this by searching for “Command Prompt” in the Start menu, right-clicking on it, and selecting “Run as administrator”.

3. In the Command Prompt, type the following command and press Enter: dism /online /enable-feature /featurename:NetFx3 /All /Source::\sources\sxs /LimitAccess

Note: Replace with the actual drive letter of your Windows Installation Media (e.g., D:\).

4. Wait for the command to execute and complete the installation of .NET Framework 3.5 from the Windows Installation Media.

5. Once the installation is complete, restart your computer to apply the changes.

By using the Windows Installation Media and running the specified command, you can resolve the NET Framework 3.5 Error 0x800F081F on Windows 10.

Bypass WSUS to Install .NET Framework

To bypass WSUS and install .NET Framework on Windows 10, follow these steps:

1. Open the Command Prompt as an administrator. You can do this by searching for “Command Prompt” in the Start Menu, right-clicking on it, and selecting “Run as administrator.”

2. In the Command Prompt, type the following command and press Enter: dism /online /enable-feature /featurename:NetFx3 /all /source:C:\sources\sxs /LimitAccess
This command enables the .NET Framework 3.5 feature on your Windows 10 system.

3. Wait for the command to complete. It may take a few minutes to install the necessary files.

4. Once the command finishes executing, you should see a message indicating that the operation was completed successfully.

5. Close the Command Prompt.

Run DISM or Install from Local Source Offline

To fix the NET Framework 3.5 Error 0x800F081F on Windows 10, you can try running DISM or installing from a local source offline. Here’s how:

1. Open the Command Prompt as an administrator by right-clicking on the Start button and selecting “Command Prompt (Admin).”

2. If you have a Windows 10 installation media (DVD, USB), insert it into your computer and note the drive letter assigned to it.

3. In the Command Prompt window, type the following command and press Enter: dism /online /enable-feature /featurename:NetFx3 /source::\sources\sxs /all /LimitAccess (replace with the actual drive letter of your Windows 10 installation media).

4. Wait for the DISM tool to complete the operation. It may take a few minutes.

5. Once the operation is finished, restart your computer and check if the NET Framework 3.5 error is resolved.

If you don’t have a Windows 10 installation media, you can use the Windows Assessment and Deployment Kit (ADK) to create a local source. Here’s how:

1. Download and install the Windows ADK from the Microsoft website.

2. Open the Command Prompt as an administrator.

3. In the Command Prompt window, type the following command and press Enter: dism /online /enable-feature /featurename:NetFx3 /source:C:\path\to\adk\folder /all /LimitAccess (replace C:\path\to\adk\folder with the actual path to the ADK folder on your computer).

4. Wait for the DISM tool to complete the operation. It may take a few minutes.

5. Once the operation is finished, restart your computer and check if the NET Framework 3.5 error is resolved.

Avoid Using ESD for Installation

To avoid encountering the NET Framework 3.5 Error 0x800F081F on Windows 10 during installation, it is advised to avoid using ESD (Electronic Software Distribution) files. ESD files can sometimes cause issues and prevent the successful installation of the framework. Instead, it is recommended to use the following steps:

1. Open the Command Prompt with administrative privileges by searching for “Command Prompt” in the Windows Start menu, right-clicking on it, and selecting “Run as administrator.”

2. In the Command Prompt window, type the following command and press Enter: DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:

3. Replace with the correct path to the Windows installation files. This could be a mounted ISO file, a network share, or the original installation media.

4. Wait for the command to execute and complete the installation of the .NET Framework 3.5.

Download .NET Framework Outside Windows Update

.NET Framework logo

To download .NET Framework outside of Windows Update and fix the 0x800F081F error on Windows 10, follow these steps:

1. Open the Command Prompt as an administrator.
2. Type the following command and press Enter: dism /online /enable-feature /featurename:NetFx3 /all /source:<path to Windows installation files> /LimitAccess

Note: Replace <path to Windows installation files> with the path to your Windows installation files. This could be a mounted ISO file or a network share.

3. Wait for the command to complete. It may take a few minutes.
4. Once the installation is finished, restart your computer.
5. After the reboot, check if the error is resolved by attempting to install or use .NET Framework 3.5.

By downloading .NET Framework outside of Windows Update using the Command Prompt, you can bypass any issues that may arise from the Windows Update process. This method allows you to directly install .NET Framework from a specified source, ensuring a successful installation.

Remember to replace the <path to Windows installation files> with the correct path on your system. This could be the path to a mounted ISO file or a network share where the Windows installation files are located.

If you encounter any difficulties during the installation process, make sure you have proper internet access and that your firewall is not blocking any necessary connections. Additionally, double-check your source code and system settings to ensure they are configured correctly.

Following these steps should help you resolve the 0x800F081F error and successfully install .NET Framework 3.5 on your Windows 10 system.

Alternative Steps for Windows Server Configuration

Windows Server configuration interface

  • Verify if the .NET Framework 3.5 feature is enabled on your Windows 10 computer.
  • Use the Deployment Image Servicing and Management (DISM) tool to enable the feature if it is not already enabled.
  • Insert the Windows 10 installation media (USB or DVD) into your computer.
  • Open the Command Prompt as an administrator.
  • Type the following command and press Enter: dism /online /enable-feature /featurename:NetFx3 /all /source:<drive>:\sources\sxs /LimitAccess
  • Replace <drive> with the drive letter of your Windows 10 installation media.
  • Wait for the command to complete the installation of the .NET Framework 3.5 feature.
  • Restart your computer to apply the changes.

F.A.Q.

How to fix .NET Framework 3.5 error 0x800F081F in Windows 10?

To fix .NET Framework 3.5 error 0x800F081F in Windows 10, you can follow these steps:

1. Mount the ISO image that was created earlier.
2. Set the Alternate source file path to the ISO’s sources\sxs folder.
3. Execute the command “gpupdate /force”.
4. Finally, add the .NET Framework feature.

How to enable .NET Framework 3.5 in Windows 10 in registry?

On Windows 10, you can enable .NET Framework 3.5 in the registry by opening a command prompt with administrator user rights and using the following command: DISM /Online /Enable-Feature /FeatureName:NetFx3 /All.

How do I fix Windows Update error code 0x800F081F?

To fix Windows Update error code 0x800F081F, you can follow these steps:
– Open the Settings window by pressing Windows + I keys.
– Select System from the left vertical menu.
– Click on Troubleshoot from the right menu.
– Expand all troubleshooters by clicking on Other troubleshooters.
– Find the Windows Update section and click Run next to it.

How to fix NET Framework 3.5 installation problem on Windows 10?

To fix the NET Framework 3.5 installation problem on Windows 10, you can follow these steps:

1. Open the start menu.
2. Type in “Windows Features” and press Enter.
3. Select the “. NET Framework 3.5” check box.
4. Select Ok.
5. Follow any prompts during installation.
6. Restart your computer.

Was this article helpful?
YesNo